polthonest.blogg.se

#Minwax stain colors on spruce skin
#Minwax stain colors on spruce windows

This warranty is made to you, the product purchaser who owns the property where the product is applied. Dispose of in accordance with local fire regulations. Immediately place rags, steel wool, other waste soaked with this product and sanding residue in a sealed, water-filled metal container. DANGER: Rags, steel wool, other waste soaked with this product and sanding residue may spontaneously catch fire if improperly discarded. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. Contains solvents which can cause permanent brain and nervous system damage. DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. In case of respiratory difficulty, provide fresh air and call physician.

#Minwax stain colors on spruce skin

For skin contact, wash thoroughly with soap and water. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. Do not transfer contents to other containers for storage. If you experience eye watering, headaches or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area.

#Minwax stain colors on spruce windows

To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying.

Apply the stain and allow it to dry 10 to 15 minutes (depending on temperature and humidity).ĬAUTIONS: ALIPHATIC HYDROCARBONS.

Graining This product can be used for graining - developing a wood-grain appearance on metal, fiberglass, hardboard or other non-wood surfaces.

To ensure uniform acceptance of stain color and beautiful results, pretreat the wood with Minwax Pre-Stain Wood Conditioner following label directions.

Some soft woods (such as pine, poplar and spruce) may have a “blotchy" appearance when stained (an uneven color, darker in some areas, lighter in others) sanded wood generally will appear less “blotchy”.

Laps or drips can usually be evened out by rewetting the surface with stain and rewiping. You will have up to 15 minutes to work the stain to an even color. For a lighter shade, wipe quickly for a darker shade, allow the stain to sit longer.

The length of time before wiping determines the depth of the color developed.

Let sit 5 to 15 minutes and wipe off excess be sure color is uniform.

Apply without thinning, using brush, pad, cloth or spray.

Stir stain thoroughly and occasionally during use.